$SITE_TITLE

Star Trek: Starfleet Command 3 PC Cheats


Rating 3

Faster officer promotion

Note: This procedure requires editing a game file; creating a backup copy of the file before proceeding is recommended. With a text editor, edit the "score" file in the "\files\activision\sf3\metaassets\\singleplayer" folder. Add the following lines to the file:

[SpecializedLevelUp]
Basic = 1.0
Trained = 1.0
Skilled = 1.0
Veteran = 1.0
Expert = 1.0

Rating 2

Add cloak and shields to Borg ship

Note: This procedure requires editing a game file; creating a backup copy of the file before proceeding is recommended. With a text editor, edit the "bridge items" file in the "\activision\sfc3\assets\common settings" folder. Find and highlight the highest valued cloak and copy it. It should look like this:

[CloakItems\R-CLOAK-V]
Description = "R-CLOAK-V"
Cost = 2500
Mass = 700
CloakRating = 100
CloakCost = 10
Health = 30
Race = "R"

Paste it to the bottom of the list and change the race "R" to "B" for Borg. Note: You can also change the mass so that you can fit it on any ship (down from 700 to 100). The edited portion should look like this:

[CloakItems\R-CLOAK-V]
Description = "R-CLOAK-V"
Cost = 2500
Mass = 100
CloakRating = 100
CloakCost = 10
Health = 30
Race = "B"

Exit and save the file. You now have a cloak on any Borg ship.

After that, edit the "shield items" file in the same folder. Find the highest rated Borg Shield. It should look like this:

[ShieldItems\B-SHIELD-X]
Description ="B-SHIELD-X"
Strength = 32
Efficiency = 3.0
Cost = 2750
Mass = 8000
Race = "B"
UnavailableForRefit = 1

Highlight the "UnavailableForRefit = 1" line and delete it. Note: You can also change the mass so that you can fit it on any ship (down from 8000 to 100). The edited portion should look like this:

[ShieldItems\B-SHIELD-X]
Description ="B-SHIELD-X"
Strength = 32
Efficiency = 3.0
Cost = 2750
Mass = 100
Race = "B"

Exit and save the file. You can now have shields on any Borg ship. You can also experiment with many of the other values in these files to change other ship parameters. Be careful, as this can cause the game to crash if you change the wrong value or make it too high or too low.

Rating 2

Finding cloaked ships

Before a ship cloaks, enable "Follow Target". When the ship cloaks, you won't be able to target it, but will be facing it when it decloaks. When a ship cloaks, you can still see the shadow if it moves over you. You can also see it on the map by dragging the pointer over it. if facing a cloaked ship and do not have the Anti-Cloak, try to use the colored bars when you turn your ship. This will help you decide which shield section to send power to.

Rating 1

Free items in single-player mode

Note: This procedure requires editing a game file; creating a backup copy of the file before proceeding is recommended. With a text editor, edit the "economy" file in the "/activision\sfc3\metaassets\serverprofiles\singleplayer" folder.

Locate the lines:

0 = 0.5
1 = 1.0
2 = 1.2

And change them to:

0 = 0.0
1 = 0.0
2 = 0.0

Rating 0

Free hull repair

After receiving hull damage during a mission campaign or conquest mode, complete the mission, then go to a planet or starbase. Choose the "Refit" option. Do not do anything on the refit screen except selecting the "Accept" option. You will return to the map screen with a repaired hull.

Rating 0

Increased prestige

Note: This procedure requires editing a game file; creating a backup copy of the file before proceeding is recommended. With a text editor, edit the "character.gf" file in the "\files\activision\sf3\metaassets\serverprofiles\singleplayer" folder. Find the line that reads "// This is a characters starting prestige". Under the "[Create/0]" header, replace the value with 200000. Note: This affects Commander mode. Also, do this for the prestige values under the "[Create/1]" header for Captain mode and the "[Create/1]" header for hard mode.